Tabla de contenido
Publicidad
Q-PON CUTTER
TQ 1.0 TROUBLE SHOOTING
SECTION VII
Trouble
Possible Cause
Remedy
Motor Will Not Run ......................... Power Unit Not Connected ............................. Check Power Cord & Connection
Premature blade life ....................... Improper Speed or Gear Box Setting ............ Refer to Speed Control & Gear Box Info.
Difficult Rotation Resulting In ........ Dull or Chipped Saw Blade .............................. Replace Saw Blade
Poor Workpiece End Quality
Workpiece Rotates During Cut ........ Loose Vise Clamp............................................ TIghten Vise Clamp
Saw Blade Will Not Cut ................... Improper Saw Blade Direction ......................... Change Saw Blade Rotation Direction
18
Publicidad
Tabla de contenido
