Transportation And Storage; Environmental Protection - Ryobi RBS904 Manual De Utilización

EN
FR DE ES IT NL
■ Replace the saw blade and close the front cover.
BrusH
See Figure 22.
There is a brush located inside the saw housing next to the
wheel. It helps protect the tire and wheel by brushing off
saw dust. As the brush becomes worn, it will need to be
adjusted or replaced.
■ Remove the screw and washer then pull the brush off.
■ Place the new brush in the groove.
■ Reinstall using the washer and screw.

transportation anD storaGE

See Figures 23 - 24.
■ When transporting the product, disconnect the power
cord, lower the blade guard and unmount the product.
Store the push stick on the side of upper housing. Lift
the product by the upper housing as shown. Store the
product in a secure place which is not accessible to
children.
■ Clean the product using a brush and vacuum cleaner
before storage.

EnVironMEntal protEction

Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
syMBol
Safety alert
CE conformity
Please read the instructions carefully before
starting the product.
Wear eye protection.
Wear ear protection.
PT DA SV FI NO RU
English
PL CS HU RO LV LT
Danger! Sharp blade.
Lock
Unlock
Maximum cutting depth
Maximum cutting width
Maximum cutting angle
Operating speed
Blade size
The tool shall be disconnected from the supply
before maintenance.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
12
ET HR SL SK EL TR UK