Technical Data; Intended Use; Safety Notes - BGS technic 11999 Manual De Instrucciones

TECHNICAL DATA

Max. lifting height at max. rated load: 1677 mm
Min. lifting height at max. rated load: 178 mm
Height: min. 1450 mm
Length: 1540 mm
Width: 1040 mm
Lifting piston: Ø 28 mm
Pump piston: Ø 12 mm
Pump lever: Ø 21.5 x 550 mm
Weight: 65 Kg
Working temperature: 4°C - 41°C (40°F - 105°F)
Lifting arm length
Rated load

INTENDED USE

This lifting tool is used to lift loads. The lifting arm length can be adjusted in four positions, please note the
max. load capacity of the lifting tool.
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-compliance
of the safety instructions may lead to damage, personal injury and to termination of the warranty. Keep
these instructions in a safe and dry location for future reference. Enclose the operating instructions when
handing over the product to third parties.

SAFETY NOTES

When using lifting tools, fundamental precautionary measures must always be ensured, in order to reduce
the risk of personal injury and property damage.
• Keep children and unauthorised persons away from the work area.
• Do not let any children play with the tool or its packaging.
• Make sure that the work area is sufficiently illuminated.
• Keep the work area clean, organised, dry and free from other materials.
• Do not allow untrained persons to work with this lifting tool.
• Make sure the release valve is properly closed when lifting a load.
• Do not make any changes to the product.
• Only use accessories that are designed for use with lifting tools.
• Maintain the tool carefully to ensure safe use.
• Check the product for cracks, warpage, and other damage at regular intervals.
• Do not use the product if it is damaged. It have to repaired by a qualified personal.
• Store the tool in a dry and safe location out of the reach of children.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Crane, 1000 kg
1250 mm 1160 mm
250 Kg 500 Kg
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
1070 mm 980 mm
750 Kg 1000 Kg
BGS 11999
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed