Sinbo SSI 2852 Guia Del Usuario página 13

to "0",Un-plug and pour out the water in tank.
2. After iron cool down pack the soleplate with soft cotton or cloth and put it away in the
safe place away from child.
Operation instruction:
1. when iron the cloth which is special processed(blare/fold)?please use the lower
temperature.
2. Please classify the cloth when iron,(separate wool and cotton).The heating speed is
faster than cooking speed so iron in the lower-temperate cloth first and then high
temperature.
3. temperature setting
Please check if there is "iron-label" on cloth (It can be found on the iron-marked label
which indicate the right iron temperature).Please refer to the instructions under any
situation
Note: 1. Please cover a fabric on when iron the heat-sensitive cloth to avoid the damage
and distortion.
2. When iron the mixed fabric cloth please set the iron temperature as the lower-
temperature fabric
Fabric Temperature setting
nylon,
chem -fabric
silk, wool
cotton, linen ˚˚˚
Water filling (Fig. 3)
1. Fill the water into tank through the filling hole.
2. Dry the water out the tank and pour out the water when iron finish
3. Please fill in the no impurity and no dirty water if the water is too hard suggest to boil
first and then filter or distil don't use the chemical-processed water
Steam iron
1. fill in some water before current on (Fig. 3)
2. adjust the temperature setting as the cloth (Fig. 2)
3. power on the station power lamp start to flare(5) (Fig. 8)
4. press the power switch,power lamp light always(5),high steam lamp light(6),boiler
start heating and iron lamp light at same time,iron start heating(17)
5. adjust the steam by the "high /medium/lower" steam dail(6)/(10)/(11).
SAVE AND MAINTAIN
Iron ways
Dry iron or cover a fabric don't spray to the
˚
cloth to avoid fleck
˚˚ Dry iron silk cloth on back but not wool
thickness and fold iron the dark color cloth
on back to avoid the "aurora"
- 11 -
Steam iron ,adjust the spray as the cloth