Cleaning And Care; Troubleshooting - Blumfeldt Korinth Manual Del Usuario

EN
16

CLEANING AND CARE

Solar panel
The panel should be cleaned periodically with a soft tissue. Regular cleaning of
the panel is advised to maintain optimum conversion of the sun's energy into
direct current.
Pump
lf, after a period of time, the pump starts to lose power or stops working check
for the build up of sediment, scale or dirt in the filter. Remove the pump cover
and the impeller cover. Take out the impeller and remove any sediment, scale
or dirt that has built up. Take out the 2pcs of filter from two side of the pump
and clean them by fresh water.
Impeller

TROUBLESHOOTING

Pump does not operate even thought the solar module is in full sunlight.
• No connection to the solar module – check connection to the solar module.
• Impeller is blocked – To clean the pump, remove the front plate and the
impeller. Use a small brush or steam of water to remove any debris.
Pump does operate but there is no water running through the
fountainhead.
• Check for the build up of sediment or scale in the tubes or the filter- clean
the tubes and the filte.
Filter
Impeller Cover
Open the Pump