Sony BKM-FV50 Manual Del Usuario página 50

Video Resolution
Select NTSC (480p) or PAL (576p) as the
playback resolution for video.
Apply
Click here to save the settings.
Setup screen
This screen lets you set up the Network
Password. The factory default settings are
as follows:
Name: root
Password: fw50ad
After you have made any changes or
entered information, click "Apply" at the
bottom of each screen to enable the settings.
Special characters cannot be used in the
text fields.
Owner Information
Owner
Enter owner information here.
Display Location
Enter information about the display
installation location here.
Note
Do not use spaces when entering the
information. Doing so may cause the file
name to display incorrectly.
Memo
You can enter auxiliary information here.
20
Computer Operation
Time
Time
Enter the time and the day of the week
here.
Network
Internet Protocol (TCP/IP)
Select "Specify an IP address" to enter each
value in the IP address's numeric string.
Select "Obtain an IP address (DHCP)" to
acquire an IP address automatically from
the DHCP server. In this case, be aware
that the IP address will change each time
the display attached to the BKM-FW50 is
turned on.
Note
The BKM-FW50 requires a separate IP
address for the display control function and
the still image/video playback function.
The IP address for the display control
function can be set from the menu of the
display attached to the BKM-FW50. For
details, see "Setting an IP address for the
display control function" on page 9.
Password
The administrator and user name and
password information can be entered here.
The administrator name is fixed to "root".
Each can be a maximum of 8 characters
long.
Once a user name and password are set, the
"Network Password" screen appears
whenever the display control screen of the
BKM-FW50 is called up. To ensure
security on the network, setting a user name
and password is recommended.
Mail Report
When a display function error has occurred,
an error report is immediately sent by e-
mail (error notification).
However, there is no error notification
when an error occurs with the Player.
Address
Enter the target e-mail address here. Up to
four addresses can be specified, for
simultaneous sending of an error report.
The maximum length for each address is 64
characters.