Infrared Remote Control - Chauvet DJ Intimidator TRIO Guía De Referencia Rápida

Intimidator™ Trio QRG EN
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
Power Linking
For the maximum number of Intimidator™ Trio products that you can power
link at each voltage, see the User Manual or the sticker on the product.
1. Disconnect the product from power.
Fuse
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
Replacement
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
The Intimidator™ Trio is compatible with the Infrared Remote Control 6
Infrared Remote
(IRC-6) from Chauvet.
Control 6
The following IRC-6 buttons are used with the Intimidator™ Trio:
(IRC-6)
· <BLACKOUT> - turns LED on/off
· <AUTO> - selects auto program mode (scrolling)
· <SOUND> - selects Sound-Active mode
· <STROBE> - strobing (0–20 Hz)
· <SPEED> - Pan/Tilt auto program speed
· <SENSITIVITY> - selects sound sensitivity
· <%> - LED dimmer
· <MANUAL> - white (RGB) LED manual control
· <FADE/SNAP> - Press once for Fade color change/Press twice for Snap
· <R> - red LED manual control
· <G> - green LED manual control
· <B> - blue LED manual control
· <W> - white LED manual control
· <UV> - Zoom/rotating manual adjustment
· <A> - Pan/Tilt manual adjustment
· <+> - Increase
· <-> - Decrease
· <0> to <9> - Select auto program by number
5