Light Indicator - Creative WP-300 Manual De Instrucciones

buttons for more than 6 seconds to clear the paired
audio devices
• If the headphones malfunction, reset it by supplying
USB power, then press the Volume Up "+" and Power/
Pair buttons for about 1 second
Automatic shutdown
• Once the headphones are powered on, if it is unable
to connect to a last paired device or failed to pair with
a new device within 5 minutes, the headphones will
automatically shut down.
List of button, indicator and connector functions
Button
1.
Power/Pair
2.
Play / Pause
3.
/
Next, Forward
/ Previous,
Rewind Track
4.
/
Volume Up /
Volume Down

Light Indicator

Press and hold to for about
2 seconds to power on the
headphones. Press and hold for
about 4 seconds to power off the
headphones. In off mode, press and
hold for more than 4 seconds to
activate Pairing mode.
Press to play. Press again to pause
playback.
Press to change to the next or
previous track. Press and hold to
fast forward or reverse track (this
function is device dependent).
Press '+' to increase or press '-' to
decrease volume. A beep tone is
emitted at maximum volume level.
Pause headphones to mute.
Function
Function