Creative WP-300 Manual De Instrucciones página 6

5.
Right
earcup light
indicator
6.
Left
earcup light
indicator
Connector
7.
Micro-
USB
charging
connector
Technical Specifications:
• Driver: 34mm Neodymium magnet
• Frequency Response: 18Hz ~ 22kHz
• Impedance: 32ohms
• Sensitivity (1kHz): 102dB/mW
Wireless Technology: Bluetooth 2.1 + EDR
•
(Enhanced Data Rate)
• Bluetooth Profiles: A2DP (Wireless stereo Bluetooth ),
AVRCP ( Bluetooth remote control)
• Audio Codec: apt-X, SBC
• Operating Range: Up to 10m / 33ft
• Power Supply: Rechargeable Lithium Ion battery,
3.7V, 240mAh
• Charge / Playback: 1 hour / 8hours
• Net Weight: 107 g / 3.5oz
Green and blinks slowly: automatically
searching and attempts to connect to
the last paired device. Blue and blinks
slowly: connected to a paired device.
Blue and blinks rapidly: in pairing mode
and is ready to pair with a new device.
Red and blinks twice: powering off the
headphones. Red and blinks slowly: low
battery, charge headphones soonest.
This is accompanied by a beep tone every
2 minutes.
Red: charging headphones.
Green: headphones fully charged.
Use the supplied USB cable for
charging the headphones via a laptop
or computer.
Function