Sauder 421417 Manual Del Usuario página 15

Step 11
Turn and remove the large nut from the female end of
å
the ELECTRICAL CORD (10) as shown to the right.
Next thread the male end of the cord through the hole in
å
the RIGHT END (A) as shown below.
Lastly, turn the large nut back onto the female end of the
å
ELECTRICAL CORD (10) as shown below.
Insert the WOOD DOWEL (5) into the hole in the edge of
å
the RIGHT END (A).
Fasten the TOP (P) to the RIGHT END (A), BACK (F),
å
UPRIGHT (C) and LEFT END (B). Tighten ten HIDDEN CAMS.
NOTE: Be sure the WOOD DOWEL in the RIGHT END inserts
å
into the TOP.
B
1
P
F
C
Female end of ELECTRIC CORD
large nut
Male end of ELECTRIC CORD
2
10
5
A
10
Page 15