Installation Steps; Care And Cleaning - LUND Interceptor Instrucciones De Instalación

Installation Steps

Reposition the hood shield with the tabs sliding between the
hood and rubber seal and align with holes.
3
Tighten all (4) screws until snug to secure
hood shield to hood.
5
NOTE: DO NOT OVER TIGHTEN
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund
and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of
fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
Close Hood.
®
branded products offered by Lund International, Inc. We take the utmost pride in our products
Lund International, Lund Accessories Division
4325 Hamilton Mill Rd. Suite 400, Buford, GA 30518
800-328-5863 • Visit us at lundinternational.com
© 2011 Lund International, Inc. All rights reserved.
Lund and the Lund logo are trademarks of Lund International, Inc.
® ®
4
Turn both of the hood bumpers counter clock-
6
Apply bump ons to surface of hood
8
Page 2 of 2
Install (4) screws with washers.
wise 1 1/2 turns.
hood shield
seal
washer
screw