Indel B TB20AM Instrucciones De Uso página 9

DATA S HE E T
MO DE L
Total capacity
External dimensions (HxWxD)
Weight
Installed power
Supply voltage
Cooling gas and charge
This appliance contains fluorinated greenhouse gas R134a within an hermetically sealed system
and its operations depends on the presence of this gas.
Further information is provided on the technical data label inside the product.
IN S TALL ATIO N
WA R N I N G
Do not install the refrigerator near heat sources. This device can work at a MAXIMUM
INCLINATION OF 30°.
SHOULD THE CAB BE TIPPED OVER, TURN OFF THE REFRIGERATOR.
THE REFRIGERATOR MUST BE INSTALLED EXCLUSIVELY INDOORS.
FA S TE N I N G TH E R E FR I G E R ATO R
To fasten the device, use the plates and ball pins provided with each device.
This system allows you to anchor the refrigerator firmly to the vehicle and if necessary to remove
it by a simple operation.
Proceed as follows:
- Fit the pins on the plate using the nuts (Fig. 1);
- Fix the plate in the desired position;
- Push the fridge onto the pins connected to the plate and lock it in place with the provided
knob (Fig. 2).
W I R I N G SYS TE M
Compressor station
Functions and features.
This is an electronic device which has the function of piloting the motor of the compressor and
carrying out all the controls and electrical protection of the system.
Its main features are as follows:
a) Protection of the battery through automatic turning off of the compressor when the feeding
voltage reaches the minimum threshold.
The compressor will start up again automatically when the voltage goes back to normal values.
T B20AM
20 L
476 x 426 x 250 mm
15 Kg
50 W
DC 12-24 V
R134a 0,035 kg - CFC Free (CO2 eq. 0,050 t)
7