Descargar Imprimir esta página

Pioneer VSX-933 Manual De Instrucciones página 86

Publicidad

Setting Item
Default Value
Double Bass
Off
„ Distance
Set the distance from each speaker to the listening position.
Setting Item
Default Value
Front Left
10.0 ft/3.00 m
Center
10.0 ft/3.00 m
Front Right
10.0 ft/3.00 m
Height Left
10.0 ft/3.00 m
Height Right
10.0 ft/3.00 m
Surround Right
10.0 ft/3.00 m
Setting Details
This can be selected only when "Configuration"
- "Subwoofer" is set to "Yes" and "Front" is set to
"Large".
Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted
"Off": Bass output will not be boosted
• The setting will not automatically be configured
even if you performed Full Auto MCACC.
Setting Details
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Configuration"
- "Zone Speaker" is set to "Zone 2" and Zone 2
is on.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Configuration"
- "Zone Speaker" is set to "Zone 2" and Zone 2
is on.
Specify the distance between each speaker and
the listening position.
Contents
Connections
Setting Item
Default Value
Surr Back Right
10.0 ft/3.00 m
Surr Back Left
10.0 ft/3.00 m
Surround Left
10.0 ft/3.00 m
Subwoofer
10.0 ft/3.00 m
• Default values vary depending on the regions.
• The unit of distance can be changed by pressing the MODE button on the remote
controller. When using the unit "feet", the setting is available in increments of 0.1 ft from
0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of
0.03 m from 0.03 m to 9.00 m.
86
Front Panel≫ Rear Panel≫ Remote≫
Playback
Setup
Setting Details
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Configuration"
- "Zone Speaker" is set to "Zone 2" and Zone 2
is on.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Configuration"
- "Zone Speaker" is set to "Zone 2" and Zone 2
is on.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.

Publicidad

loading