Introduction; Device Description And Scope Of Delivery (Fig 1-2); Intended Use - Scheppach SC32 Traducción De Las Instrucciones De Uso Originales

1. Introduction

MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
WE RECOMMEND:
Read through the complete text in the operating in-
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operat-
ing instructions contain important information on how
to operate the machine safely, professionally and
economically, how to avoid danger, costly repairs, re-
duce downtimes and how to increase reliability and
service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regu-
lations that apply for the operation of the machine in
your country. Keep the operating instructions pack-
age with the machine at all times and store it in a
plastic cover to protect it from dirt and moisture. Read
the instruction manual each time before operating the
machine and carefully follow its information. The ma-
chine can only be operated by persons who were in-
structed concerning the operation of the machine and
who are informed about the associated dangers. The
minimum age requirement must be complied with.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to
the operation of identical devices must also be ob-
served.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description and scope of
delivery (Fig 1-2)
1. Shift lever
2. Safety switch
3. Upper push bar
4. Mains connection/mains cable
5. Plastic star grip nut
6. Middle push bar
7. Catch basket
8. Lower push bar
9. Working height adjustment
10. Rear wheel
11. Front wheel
A. Allen key size 5
B. Cable strain relief
C. Cable clamp
D. Aerator roller, D1 scarifying roller (mounted)
E. Cylindrical screw (Fig. 12)
F. Fixing screw
G. Screw for push bar (fig. 3)
H. Screw for safety switch (fig. 6)
Unpacking
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty
period has expired.
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!

3. Intended use

The equipment can be used both as a scarifier and
an aerator depending on the intended use. Only a few
movements are required to change the roller.
The scarifying roller is designed for ripping moss and
weeds - complete with their roots - out of the soil and
for loosening the soil. As a result your lawn can ab-
sorb nutrients better and is cleaned. We recommend
you to scarify your lawn in the spring (April) and au-
tumn (October).
GB | 17