Configuring The Transmitter; Sound Processing - Worldcast Systems ECRESO FM 5kW Guía Rápida

English version
4.3

Configuring the transmitter

Click the button
'Easy Config' page.
Basic configuration can be managed on this single page:
• Power, frequency and RF on
• Input priority setting
• MPX configuration
• Input configuration
Default transmitter pre-accentuation is 50 µs. Depending on your country, you might need to switch it
to 75 µs (in the United States for instance). The Pre-accentuation parameter is available in the Input
Source section.
Once values have been changed, click the button
4.4

Sound processing

The Sound processing option is enabled for 30 days.
With an audio input, the default preset is '5B Natural'. To modify sound processing parameters, go to
the Transmitter/Modulation/Sound Process page.
To request a permanent license, contact your WorldCast Systems dealer.
4.5 SmartFM
Around 30 days of SmartFM credits have been added to the transmitter.
Go to the Transmitter/Main/SmartFM page to test the option and observe actual benefits.
To request additional credits, contact your WorldCast Systems dealer.
4.6 Getting on air
You may now enable the RF with the button on top of the Configuration page.
You are now on air!
10
in the tool bar to access the transmitter configuration and display the
to save the new settings.