Setting The Transmitter; Input Selection; Setting The Mpx Inputs - Worldcast Systems ECRESO FM 5kW Guía Rápida

English version
3.2

Setting the transmitter

Set the power (in W), the frequency (in MHz):

We recommend you set the power to 2 kW to check the transmitter works properly before setting it to the
desired power.
Using the arrows to adjust the frequency. Once you've reached the desired value, press the
Check button to confirm the value. Use the down arrow key to go the next parameter.
You may now set the power of the ECRESO FM the same way you set the frequency.
Press the Return button to return to the list of menus.
3.3

Input selection

Use the Check button to switch to edit mode, the arrow keys to adjust values and the Check button to
confirm.
Press the Return button twice to return to the list of menus.
3.4

Setting the MPX inputs

6
From the main screen, press the Check button to
display menus then the down arrow until you see
the TX Parameters menu.
Once you see this screen, press the Check button
You may now set the frequency. The green frame
around the frequency indicates that this
parameter is selected: press the Check button to
switch to edit mode.
From the main screen, press the Check button to
display menus then the down arrow until you see the
Input Switch menu.
Press the Check button to enter the menu and find
the Input Select sub-menu. Press the Check button
again.
Select the input:
• "LINE1" for analog (see sections 3.5 to 3.7)
• "LINE2" for AES (see sections 3.5 to 3.7)
• "MPX1" for MPX (see sections 3.4 and 3.7)
• "MPX2" for MPX (see sections 3.4 and 3.7)
• "PLAYER": µSD card (option)
• "GENE": internal generator
From the main screen, press the Check button to
display menus then the down arrow until you see the
MPX menu.
Press the Check button to enter the menu and find
the MPX1 Input sub-menu. Press the Check button
again