Getting On Air; Network Configuration; Connecting To The Web Interface - Worldcast Systems ECRESO FM 5kW Guía Rápida

English version
Default transmitter pre-accentuation is 50 µs. Depending on your country, you might need to switch it
to 75 µs (in the United States for instance). The Pre-accentuation parameter is only visible in Expert
mode; you must therefore first change the front panel working mode:
3.7

Getting on air

You may now enable RF using the front panel button.
You are now on air!
4. With the embedded website
4.1

Network configuration

First set the IP address with the front panel:
4.2

Connecting to the web interface

Now the transmitter is set, connect it to the network.

Though the web application is compatible with most browsers, performances vary from one browser to
another. Below is a list of compatible browsers from the most performing to the less performing by
operating system:
• Windows Vista: Google Chrome / Mozilla Firefox
• Windows 7: Google Chrome / Mozilla Firefox / Microsoft Internet Explorer 11
• Windows 8: Google Chrome / Mozilla Firefox / Microsoft Internet Explorer 11
• Windows 10: Google Chrome / Mozilla Firefox / Microsoft Edge
• Mac (OSX 10.9): Google Chrome / Mozilla Firefox / Safari
8
Press the up or down arrow key until you see the
Easy/Expert menu. Then press the Check button
twice. Press the up or down key once and the Check
button to switch to Expert mode.
Go back to the Line1 menu. Find and update the pre-
emphasis.
Use the Check button to switch to edit mode, the
arrow keys to adjust values and the Check button to
confirm.
Press the Return button to return to the list of
menus.
From the main screen, press the Check button to
display menus then the down arrow until you see the
Network menu.
Once you see this screen, press the Check button.
The IP address is selected: press the Check button to
switch to edit mode. Use the up and down keys to
adjust values by section, right and left keys to go from
one section to the next. Press the Check button to
confirm.
Modify the netmask address the same way as needed.