English
Safety Precautions
This equipment complies with international mechanical and electrical standards. To maintain this compliance,
as well as to ensure proper and safe working conditions and avoid electrical shocks and fire hazards, you must
comply with the following recommendations:
• The device should only be utilized in the conditions described in the user manual.
• The device is designed for industrial usage and must only be operated by qualified personnel.
• The device may be heavy; it must be lifted and handled with care, specifically during unpacking and set up.
• Rackable products must be set in cabinet with 19" rack mounting screws.
Electrical precautions
• Disconnect all sources of power before any intervention.
• Any maintenance, adjustment or repair must be carried out by personnel specifically trained by WorldCast
Systems.
• Before switching on the device, make sure the nominal voltage specified on the device matches the mains
nominal voltage.
• The device should only be operated on a stable electrical network. If the electrical network is not stable, a
power conditioner, such as a UPS, must be used
• The device must only be used with a plug that incorporates a protective ground contact.
• To avoid any risk of electrocution, the protective earthing conductor must not be cut, intentionally or
accidentally, either on the device or on the power cord.
• High quality shielded cables are mandatory.
Environmental precautions
• It is necessary to verify that environmental conditions comply with those recommended in the manual.
• Nothing must obstruct the ventilation.
• To avoid any electromagnetic interference, the device must only be used when it is closed, installed in a
cabinet and connected to the earth as per the instructions.
• The device should not be exposed to dripping or splashing and no objects filled with liquids, such as coffee
cups, should be placed on the equipment.
• Connectors may be hot on high power units.
Precautions regarding the lithium battery
This device includes a lithium battery.
If the battery is not correctly replaced, there is a risk of explosion.
Only replace it with a battery of the same type. Contact us before attempting to use another type
• Do not puncture the battery
• Do not throw the battery in fire
• Do not immerse the battery in water
• Do not throw away the used battery, recycle it instead. You may send it back to us if needed.
Perchlorate material – special handling may apply, see
If these precautions are not followed, the guarantee will be void.
https://dtsc.ca.gov/perchlorate/
3