MPORTANT NOTES ON PERSONAL SAFETY
• Operate the tool using common sense.
• Only operate the tool at a safe distance from yourself and other persons
• Always ensure a firm foothold in order to be able to maintain your balance at all times.
• Do not use this tool if you are under the influence of medication, alcohol or drugs, or if you are
tired. Read the package insert of your medicine in order to rule out an impairment of your
judgement or reflexes.
• Do not use the device if there is any doubt about the functionality of this tool.
• Always stay aware. During work, observe your workplace and carry out work with utmost care.
• Before use, check the tool for damage. If a part is damaged, use the tool again only after all
damaged parts have been repaired by an authorised specialist.
OCCUPATIONAL SAFETY
When using this tool, always wear following protective equipment:
Dust mask
•
•
Safety glasses
Hearing protection
•
Anti-slip safety shoes
•
•
Work gloves
SCOPE OF DELIVERY
1 Air blow gun, 3 Steel pipe nozzles in length 100,160 and 320 mm, 3 Rubber tips, 1 Plastic nozzle,
1 Turbo nozzle and 1 Air inlet nipple.
USE
1. Install the air inlet nipple into the air inlet.
2. Make sure the trigger lever is in the closed position.
3. Connect the device to the hose of the compressed air source.
4. Insert a required nozzle in the required position.
5. Start the device by pressing the trigger lever.
ENVIRONMENTAL PROTECTION
Dispose of this product at the end of its working life environmentally.
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and disposed
of in a manner which is compatible with the environment. Contact your local solid
waste authority for recycling information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed