Philips Essence HR7753 Instrucciones De Uso página 15

1 Clean the motor unit with a damp cloth.
Do not immerse the motor unit in water
and do not rinse it either.
2 Always clean the parts that have come into
contact with food in hot water with
washing-up liquid immediately after use.
The bowl, the lid of the bowl, the pusher and
the accessories (except for the blender jar)
can also be cleaned in a dishwasher.
These parts have been tested for dishwasher
resistance based on DIN EN 12875.
The blender jar is not dishwasherproof!
Clean the metal blade, the blade unit of the
blender and the inserts very carefully.Their cutting
edges are very sharp!
Make sure that the cutting edges of the blades
and the inserts do not come into contact with
hard objects.This could cause them to become
blunt.
Certain ingredients may cause discolourations on
the surface of the accessories.This does not have
a negative effect on the accessories.The
discolourations usually disappear after some time.
C
Wind the (excess) mains cord around the reel
on the back of the appliance.
Blender quick-clean operation
C
1 Pour lukewarm water (not more than
0.5 litres) and some washing-up liquid into
the blender jar.
2 Close the lid.
C
3 Let the appliance run for a few moments
by turning the knob to the pulse position.
The appliance stops running when you
switch to position 0 (off).
4 Detach the blender jar and rinse it with
clean water.
Storage
MicroStore
C
Put the accessories (blade, insert holder) on
the tool holder and store them in the bowl.
Always end up with the insert holder.
ENGLISH
15