Dash Disassembly; Kit Preparation - Metra 99-3309B-LC Instrucciones De Instalación

Dash Disassembly

1. Unclip and remove the radio trim
panel. (Figure A)
2. Remove (4) Phillips screws securing
the factory radio and then remove.
(Figure B)
Continue to Kit Preparation
99-3309B-LC
(Figure A)
(Figure B)

Kit Preparation

From the factory radio trim panel
(Figure A):
1. Unclip and remove the A/C vents.
2. Unclip and remove the hazard
button.
3. Remove (5) Phillips screws
securing the upper display shroud.
From the 99-3309B-LC radio trim
panel (Figure B):
1. Snap in the factory A/C vents.
2. Attach the (10) panel clips
supplied.
Continue to Kit Assembly
2
Step 3
Step 1
Step 2
(Figure A)
(Figure B)
Step 3