auna Harvard IR Manual De Instrucciones página 61

the radio Function.
Scan
You can use the scan (autotune) function to automatically scan for new
digital radio stations and remove inactive ones. To carry out an auto tune:
1. Press the Menu button on the remote control.
2. Turn and press the Select dial or use the <Select> buttons on the remote
control to choose 'Scan'.The number of stations found will be displayed
during the auto tune . When the auto tune has finished, will tune to
the last station that you were listening to. If the last station you were
listening to is no longer available,will tune into the first station in the
alphabetical list.
Manual tuning
To manually tune digital radio station that broadcasts on DAB Band III:
1. Press the Menu button on the remote control..
2. Turn and press the Select dial or use the <Select> buttons on the remote
control to choose 'Manual tune'.
3. Turn and press the Select dial or use the <Select> buttons on the remote
control to choose the channel that the radio station is broadcasting on.
4. Press the Menu button to return to the main menu.
Prune invalid
To remove inactive stations from the station list:
1. Press the MENU button on the remote control or hold the MENU button
repeatedly on the main unit to select MENU function.
2. Turn and press the Select dial or use the <Select> buttons on the remote
control to choose 'Prune invalid'.
3. Turn and press the Select dial or use the <Select> buttons on the remote
control to choose 'Yes'. Will remove all inactive stations from the station
list.
Dynamic range control
Dynamic Range Control (DRC) is used to make quieter sounds in a digital
radio broadcast easier to hear at low volume or in a noisy environment.
Check with the broadcasters to find out if they use DRC.
1. To change the DRC settings: Press the MENU button on the remote
control or hold the MENU button repeatedly on the main unit to select
MENU function.
2. Turn and press the Select dial or use the <Select> buttons on the remote
control to choose 'DRC'.
3. Turn and press the Select dial or use the <Select> buttons on the remote
EN
61