Publicidad
Idiomas disponibles
Idiomas disponibles
RECESSED BILICO WITH SINGLE DOOR – BILICO1N
3,2
3,2
197,2
C
L
3,5
Drill the shower pan as per the pattern supplied.
1.
Verify the flatness of the shower pan and how perpendicular it is to the
wall. Verify that the measurements correspond to standard sizes or
those communicated to antoniolupi when the shower enclosure was
ordered. Outline the holes to be drilled on the wall maintaining the
alignments as illustrated.
3.
Assemble the bottom pin to the glass door as indicated.
5.
Place the holder P in the hole provided in the shower tray and seal it
with silicone. Be careful not to obstruct the support hole.
1
4
2.
Secure the fixing to the wall making sure that the hardware provided
is suitable to the existing wall. After having secured the other fixing,
position the bar without completely blocking it so as to perform the
subsequent adjustments.
4.
Assemble the top pin to the glass door as indicated.
2
3
5
P
2
Publicidad
