Antoniolupi BILICO1N Manual De Instrucciones página 21

RECESSED BILICO WITH SINGLE DOOR – BILICO1N
6.
After having assembled the pins to the glass door, position the door
by inserting the pin in its support and connecting the top pin to the bar
as indicated in Fig.7 tightening the safety screws as in Fig.8
PS Pay attention to the door stopper that must be installed internal to
the shower.
9.
Verify that the bar is in contact with the top pin
6
!
9
0
10.
Tighten the safety screw.
7
8
10
3