Gude KLS 18-0 Traducción Del Manual Original página 23

Service
Do you have any technical questions? Any claim? Do you
need any spare parts or operating instructions? We will
quickly help you and without needles bureaucracy at
our web pages at www.guede.com in the Servicing part.
Please help us be able to help you. In order to identify
your device in case of claim we need the serial No.,
product No. and year of production. All this data can be
found on the type label.
Failure removal
Failures
Compressor does not start when
switched on
Safety valve blows off
Compressor unit becomes too hot
Compressor unit is overheated and
the compressor switches off
Tel.:
Fax:
Email:
Causes
Battery is empty
Tank pressure is higher than the set
cut-out pressure
Safety valve is defective
Supply air is not sufficient
Compressor unit is overloaded
Compressor unit is defective
Undervoltage present at the com-
pressor unit
+49 (0) 79 04 / 700-360
+49 (0) 79 04 / 700-51999
support@ts.guede.com
Removal
Check battery and charge occasionally
Have the pressure switch readjusted /
replaced by a qualified person (Güde
Service)
Replace the safety valve or contact
Güde Service
Ensure sufficient ventilation (mini-
mum distance from the wall 40 cm).
Notify Güde Service
Notify Güde Service
Charge the battery
ENGLISH
19