Cleaning The Interior; Main Components; Gas Hob; Solid Top Gas Hob/Simple Service - KBS 700 Serie Instrucciones Para Instalación, Uso Y Mantenimiento

Cocinas, placa radiante a gas, simple service
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 83
Replacing the burner
• Remove the panel below oven door.
• Remove the loor and the plate positioned on top of the bur-
ner.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the pilot burner and igniter.
• Remove the panel below oven door.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the thermocouple
• Remove the control panel.
• Remove the panel below oven door.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
22.4

ELECTRIC HOB

Replacing the knob and indicator light
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the hotplate.
• Remove the control panel and internal guards.
• Remove and replace the component.Screw spacer M8 taken
from the old part onto the new one.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
22.5

ELECTRIC OVEN

Replacing the knob and indicator light
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the working thermostat and safety thermostat.
• Remove the control panel.
• Remove the bulb from its seat on the side of the oven.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the heating element
• Remove the oven loor (only for lower heating elements).
• Undo the screw securing the element to the oven and pull the
element out by approx. 10 cm.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
22.6 GRILL
Replacing the heating element
• Undo the screw securing the element to the oven and pull the
element out by approx. 5 cm.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
10

23 CLEANING THE INTERIOR

• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.

24 MAIN COMPONENTS

24.1

GAS HOB

• Gas tap
• Main burner
• Pilot burner
• Thermocouple
24.2

SOLID TOP GAS HOB/SIMPLE SERVICE

• Gas tap
• Main burner
• Pilot burner
• Thermocouple
• Igniter
• Piezoelectric ignition
24.3

GAS OVEN

• Gas valve
• Main burner
• Pilot burner
• Thermocouple
• Igniter
• Piezoelectric ignition
24.4
ELECTRIC HOB
• Control knob
• Hotplate
• Indicator light
24.5
ELECTRIC OVEN
• Control knob
• Working thermostat
• Safety thermostat
• Heating element
• Indicator light
24.6 GRILL
• Energy regulator
• Grill heating element

Publicidad

Tabla de contenido
loading

Tabla de contenido