mamibot EXVAC660 PLATINUM Manual De Instrucciones página 16

4. Scan the QR code below or on the bottom of the vacuum robot (Figs. 5–6). Follow the instructions until the
devices are successfully paired.
Warning: At the beginning of pairing, you need to be connected to your Wi-Fi network.
5. After successful pairing, click on the symbol (Fig. 7). Here you can change the device's name (Fig. 8).
6. Click SCHEDULE and set the desired cleaning plan (Fig. 9).
Fig. 5
7. Select the device (Fig. 10) to go to the main control panel. You can choose between the SMART (Automatic
/ ZIGZAG), SPOT (Circle), Edge (EDGE), Charge (search for the docking station (Fig.11).
8. Select DIRECTION KEY (Fig. 12) for manual control (Fig. 13).
Fig. 10
Fig. 6 Fig. 7
Fig. 11
Fig. 8
Fig. 12
EN
Fig. 9
Fig. 13
95