Clatronic KM 2717 Instrucciones De Servicio página 31

5....-05-KM 2717 New
• Chop the food to be mixed into small pieces.
• Fill the mixer vessel (3) with the food to be mixed (max. 1.5 l). Never fill with hot
food or hard ingredients such as potatoes, ice, coffee beans, nuts, and so on.
• Position the lid (4) with the pouring aperture facing to the right and then lock this
in place by turning it anticlockwise.
• Close the filling slot seal (5).
• Mount the mixing bowl (3) as described in paragraph 6.
• Extra ingredients (e.g. seasoning) can also be added through filling slot in the
mixer lid. Switch off the appliance.
Mixing bowl:
• The lid of the mixing device (19) must be mounted as described in paragraph 6.
• The mixing bowl must be mounted as described in paragraph 1.
• Press the metal knife (15) or the plastic knife (16) downwards as far as possible
without the utensil holder.
• When grating/cutting attachments are used, place the desired utensil on to the
utensil holder (14).
• Never use more than one utensil at a time.
• Position the lid of the bowl (8) as described under points 4 and 5
• Use the filler (17) to press the food (max. 1.5 l) into the filling slot. Exert a suffi-
cient degree of pressure on the filler. The appliance must be switched on only
with the filler (17) mounted into place.
• Connect the appliance to a 230 V/50Hz socket.
• Interval switching (P): turn the appliance switch to the left at brief and regular
intervals several times. By doing so, the result of the operation can be checked
gradually.
Always choose a utensil and a speed according to the following table
Product/Type of Preparation
Heavy dough (e.g. yeast dough)
Cake mixture
Sponge mixture or wafer mixture
Cutting up, e.g. fruit, vegetables, meat
Cutting cucumbers, carrots
Grating carrots, radish, cheese
Grating apples and carrots
Grating potatoes, hard cheese
Potatoes
Liquids, shakes
Note: The cutting and grinding attachments are located in the accessory drawer
(20) under the machine.
16.04.2003 9:34 Uhr
Putting into function
Max. Quantity
500 g plastic knife
750 g plastic knife
750 g plastic knife
500 g metal knife
500 g cutting attachment 12
500 g fine grater
500 g coarse grater
500 g grating attachment
500 g
up to 1.5 l mixing vessel
Seite 31
Utensil Level
I to II
II to III
II to III
II to III
II to III
II to III
II to III
II to III
chip disk II to III
III or P
GB
Max.
Operating Time
3 min
5 min
5 min
5 min
5 min
5 min
5 min
5 min
3 min
2 min
31