Touch Controls - Urbanista 2AEN5-UP Manual De Instrucciones

PARIS MANUAL (ENG)
1. PAIRING
FIRST TIME PAIRING
1.1 - Put the earphones into the charging case and remove
them again. Indicator light will flash blue three times.
1.2 - Hold the earphones close to each other. Left and right
earphones will pair automatically.
Upon successful pairing, the indicator light on the left
(L) earphone will stop flashing and the right (R) earphone
will flash slowly.
1.3 - Open Bluetooth setting on your phone and Select "Urbanista
Paris R"
1.4 - Pop out Pairing accept request for connect "Urbanista
Paris L" , CLICK "Yes"!
RESET EARPHONES
1.1 - Take out earbuds from charging case , long press 5
seconds to turn off the devices.
1.2 - Long press 8 seconds , till LED light consistant on ,then
quick twice click touch panel in both earbuds within 3seconds.
1.3 - LED will quick flash in both earbuds when successful clear
the pairing records. then, it will go into pairing mode.
1.4 - Now you go back to top/1st time pairing in step 3 for
pairing your phone.

2. TOUCH CONTROLS

Via the logo button
TURN ON - Remove earphones from the charging case OR Touch
the (L) and (R) logo for 2 seconds. The indicator light will flash
blue three times.
TURN OFF - Place earphones in the charging case OR Touch
either the right (R) or left (L) logo for 5 seconds. The
indicator light will flash blue three times.
TURN ON VOICE ASSISTANT - Touch the logo twice (R).
2