NOTE: The following products are optional accessories.
Top
Additional Shelf
ASSEMBLY INSTRUCTIONS
OPTIONAL TOP
1.
Bolt top to door frame and side panels using six
shorter carriage bolts and six nuts, with nuts on the
inside of unit. (See Figure 11)
NOTE: If attaching top with add-on units, use
two L-brackets, two shorter carriage bolts and
two nuts to connect the starter unit side panel
to the add-on top panel. (See Figure 13)
OPTIONAL BACK
1.
Bolt back to side panels using eight shorter carriage
bolts and eight nuts, with nuts on the inside of the unit.
(See Figure 12)
Figure 12
PAGE 4 OF 15
OPTIONAL ACCESSORIES
Additional Shelf Rail
Back
Figure 13
(For Add-On Units Only)
Starter Unit
#
DESCRIPTION
1
Top
2
Back
3
Additional Shelf
4
Additional Shelf Rail
Short Hex Head Bolt (Not Shown)
Longer Carriage Bolt (Not Shown)
Shorter Carriage Bolt (Not Shown)
Nut (Not Shown)
L-Bracket (Not Shown)
Figure 11
NOTE: If attaching back with add-on units, use
four L-brackets, four shorter carriage bolts and
four nuts to connect the starter unit side panel
to the add-on back panel. (See Figure 13)
Top
Back
QTY.
1
1
1 (4-Piece)
2
8
4
19
23
6
Add-On
Unit
L-Brackets
0721 IH-8325