Transportation And Storage; Environmental Protection - Ryobi EMS305RG Traducción De Las Instrucciones Originales

To assure safety and reliability, all repairs, including
changing brushes, should be performed by an
authorised service centre.
If the power supply cord is damaged, it must be
replaced only by the manufacturer or by an authorized
service centre to prevent damage to the saw or risk of
electrocution.
WARNING
For greater safety and reliability, all repairs should be
performed by an Authorised Ryobi Service Centre.
Maximum cutting depth stop
blade from cutting into the metal base of the unit.
WARNING

TRANSPORTATION AND STORAGE

When storing the product, disconnect the power
cord. Store the product in a secure place that is not
accessible to children. Store the power cord as shown
Clean the product using a brush and vacuum cleaner
before storage.
If you remove the saw blade or keep spares with
the unit, ensure they are in the original packaging to
prevent injury.
To secure the product prior to movement:
The product should be stored at the zero degree mitre
and bevel angle and locked in position. The slide should
be locked. The handle should be locked in the lower
(safe) position with the guards closed.
One or both sides of the work piece supports can be
removed for ease of carrying.
To move or transport in a vehicle:
Secure the product prior to movement as described in
the manual.
Remove the product from the bench top by releasing
the 4 bolts, one at each corner. Secure the bolts for
future use. Lift the product using the handle at the top.
When lifting to a height, two persons wearing heavy
gloves are needed to lift the base of the product.
When transporting in a vehicle, set the product on its
base and secure against movement.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
SYMBOL
Safety alert
CE conformity
Please
carefully
machine.
Class II tool, double insulation
Wear ear protection
Always wear eye protection.
Danger! Sharp blade.
Wear safety gloves
Blade rotation direction (shown on
saw blade)
Blade rotation direction (shown on
blade guard)
Blade width of cut (Kerf)
Number of teeth on this saw blade
For cutting wood and analogous
material
Not for cutting metals
English
read the instructions
before starting the
5
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
EL
TR
UK