Device elements
1 Pickup for floor nozzle
2 Suction hose
3 Air outlet, working air
4 Suction head
5 Tool adapter
6 Suction force regulator (continuous)
7 Rubber sleeve, screwable
8 Suction head lock
9 Dirt receptacle
10 Steering roller
11 Recessed grip
12 Air inlet, motor cooling air
13 Suction support
14 Floor nozzle
15 Suction tube
16 Socket
17 Main switch
18 Button for filter shake off system
19 Carrying handle
20 Hose hook
21 Float
22 Bender
23 Cartridge filter (PES)
24 Fastening nut
25 Holder for suction pipe
26 Power cord
27 Nameplate
28 Cable hook
Symbols on the machine
WARNING: This appliance contains harm-
ful dust. The emptying and maintenance,
including the removal of the dust bag, may
only be executed by trained personnel
wearing suitable protection equipment. Do
not switch on until the complete filter sys-
tem has been installed.
Safety instructions
DANGER
– When the outgoing air is carried back
into the room, a sufficient ventilation
rate L in the room must be ensured. To
comply with the required limit values the
carried back volume flow must be 50%
of the fresh air volume flow (room vol-
ume V
x ventilation rate L
R
mum. Without a specific ventilation sys-
tem the following applies: L
– Only persons trained in the use of the
machine and the handling of substanc-
es for which the machine is to be used
including training in the safe disposal of
the sucked-in material may use the ma-
chine.
– This appliance contains harmful dust.
Evacuation and maintenance work, in-
cluding the disposal of the dust collec-
tion containers, may only be performed
by specialists who wear the appropriate
protective equipment.
– Do not use the appliance without the
complete filtering system.
– Please follow the safety regulations ap-
plicable to the materials that are to be
treated.
WARNING
For vacuuming, the cartridge filter must al-
ways be installed and the fleece filter bag
inserted.
– 2
EN
Cartridge filter (PES)
Item no.
9270
Fleece filter bag
Item no.
9271
W
W
Start up
) at maxi-
=1h
.
–1
13