Ypsomed YpsoPump Orbitmicro Instrucciones De Uso página 10

English
Indications for Use
The YpsoPump
tinuous subcutaneous delivery of insulin from the external infusion
pump YpsoPump
Warnings
Follow the instructions for use of the YpsoPump
Infusion Set and your YpsoPump
Avoid infections. Do not use the YpsoPump
sion Set if the individual packaging is damaged, has already been
opened, or if the cannula protector is missing. Do not use the
YpsoPump
®
the packaging. If these instructions are not followed, there is a
risk of infection. If you have any signs or symptoms of an infusion
site infection, immediately replace your infusion set and contact
your physician for treatment.
Single use only! Do not re-use, re-insert and/ or re-sterilize the
cannula. Re-use and / or re-insertion may cause damage to the
cannula and lead to site irritation, infection and/or inaccurate
insulin delivery. Re-sterilization may affect the integrity of the
YpsoPump Orbit
®
Do not use the YpsoPump
than 48 hours. Longer use may lead to site irritation, infection
and/or inaccurate insulin delivery. Change your infusion site if it
becomes itchy, red, inflamed or if you have an unexplained high
blood sugar reading.
Ensure correct delivery of insulin. Before insertion, check that
the tubing allows free flow of insulin, following the priming in-
structions of your YpsoPump
caused by air in the fluid path or a clogged tubing. Use a new
YpsoPump
®
Never prime the infusion set tubing or attempt to free a blocked
line while the tubing is connected to the inserted cannula base.
You may accidentally deliver too much insulin.
Replace the YpsoPump
becomes loose or if the cannula becomes fully or partially dis-
lodged from the skin. Check frequently to make sure the cannula
remains firmly in place. It must be completely inserted at all times
to receive the full amount of insulin.
2 – 3 hours after insertion, a blood glucose test has to be per-
formed to ensure adequate delivery of insulin. Therefore, do not
change the YpsoPump
fore bedtime.
Develop a conventional insulin injection or medication replace-
ment plan with your healthcare professional if any part of the
infusion system fails or system supplies are depleted.
10
Orbit micro Infusion Set is intended for the con-
® ®
.
®
Orbit micro Infusion Set after the expiration date on
®
micro Infusion Set.
®
®
Orbit micro Infusion Set if priming is not successful.
®
Orbit
®
Orbit
®
.
®
Orbit micro Infusion Set for longer
®
. This will prevent incorrect dosage
®
micro Infusion Set if the tape
®
micro Infusion Set immediately be-
®
Orbit micro
® ®
Orbit micro Infu-
® ®