Braun 3 Serie Manual Del Usuario página 8

This appliance is designed for household use only.
Description
1 Foil & Cutter cassette
2 Long hair trimmer
3 Precision mode switch*
4 On/off switch
5 Charging lights (green)
6 Low-charge light (red)
7 Cleaning light (yellow)
8 Replacement light for shaving parts
9 Shaver power socket
10 Special cord set (design can differ)
11 Travel pouch*
12 Protection cap*
* not with all models
Charging
Recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to 35 °C. The
battery may not charge properly or at all under extreme low or high temperatures.
Recommended ambient temperature for shaving is 60 °F to 95 °F / 15 °C to 35 °C. Do not
expose the shaver to temperatures higher than 122 °F / 50 °C for extended periods of
time.
• Using the special cord set (10), connect the shaver to an electrical outlet with the
motor switched off.
• When charging for the first time or when the shaver is not used for a few months,
leave the shaver to charge continuously for 4 hours.
• A full charge provides up to 45 minutes of cordless shaving time depending on your
beard growth.
• Shave without the cord. With normal use the shaver will be charged automatically
after every cleaning in the Clean&Charge Station (see «Clean&Charge Station (C)»).
• Maximum battery capacity will only be reached after several charging/ discharging
cycles.
• 5-minute quick charge is sufficient for a cordless shave. You can also shave by
connecting the shaver to an electrical outlet via the special cord set.
Charging lights (5)
The green charging lights show the charge status of the batteries. The green charging
light blinks when the shaver is being charged or switched on. When the battery is fully
charged, all green charging lights shine permanently, provided the shaver is connected
to an electrical outlet.
Low-charge light (6)
The red low-charge light flashes when the battery is running low. You should be able to
finish your shave.
8