Safety Precautions; Important - Acson international B Serie Manual De Instrucciones

- Outline And Dimensions

- Safety Precautions

- Installation Diagram
- Installation of Indoor Unit
- Electrical Wiring Connection
Before installing the air conditioner unit, please read the following safety precautions carefully.
• Installation and maintenance should be performed by qualified persons who are familiar with local code and
regulation, and experienced with this type of appliance.
• All field wiring must be installed in accordance with the national wiring regulation.
• Ensure that the rated voltage of the unit corresponds to that of the name plate before commencing wiring work
according to the wiring diagram.
• The unit must be GROUNDED to prevent possible hazard due to insulation failure.
• All electrical wiring must not touch the refrigerant piping or any moving parts of the fan motors.
• Confirm that the unit has been switched OFF before installing or servicing the unit.
DO NOT INSTALL OR USE THE FAN COIL UNIT IN A LAUNDRY ROOM.
Please take note of the following important points when installing.
• Do not install the unit where leakage of flammable gas may occur.
If water leaks and accumulates around the unit, it may cause fire ignition.
• Ensure that the drainage piping is connected properly.
If the drainage piping is not connected properly, it may cause water leakage which will dampen the
furniture.
• Ensure that the units panel is closed after service or installation.
Unsecured panels will cause the unit to operate noisily.
CONTENTS
- Indicator Lights
page i – ii
- Overall Checking
page 2
- Auto Random Re-Start Function
page 3
- Service and Maintenance
page 3
- Troubleshooting
page 6
SAFETY PRECAUTIONS
! Warning

IMPORTANT

! Caution
1-2
page 9
page 9
page 9
page 10
page 10