Nilox UPS SERVER PRO Manual Para El Usuario página 8

Battery replacement
Server Pro 1100
1- Remove the battery door front panel by pulling on both ends.
2- Unscrew the battery plate from UPS.
3- Pull the battery out (from right side) onto flat area.
4- Disconnect the BLACK battery cable.
Then reconnect the BLACK battery cable to the new batteries. Slide the new batteries into battery
case. Reconnect the battery cable and screw up the battery bracket. Close and reinstall the front
panel back to battery case
Server Pro 2200/3300
1- Take off the LCD box, and remove the screws.
2- Slide and Pull the front panel leftward and then take it off.
3- Disconnect the cable from the UPS and battery pack.
4- Remove the right inner battery bracket and pull the battery pack out onto flat area.
Then Install new battery pack into UPS. Screw up the battery bracket and reconnect the battery
cable A and B. Re-install the front panel back to UPS.