Nilox UPS SERVER PRO Manual Para El Usuario página 9

Button and LCD description (for models with display)
Note: A list of events shown as below is not
able to disable alarm buzzer: Low Battery,
Fan Failed, Fan Fault Time Out, and
Overheat.
No.
Input frequency and voltage
Input plug indicator
Output frequency and voltage
Output plug indicator
UPS status/user setting display String
Warning indication
Settings
Battery volume level display
Load capacity level display
Description
Button
--To turn on/off the UPS:
button for more than 3 seconds.
--To perform basic function & Battery test:
and hold the button for 3 seconds & 10 seconds.
-- To disable alarm buzzer:
Press the Select button
value one by one
-- Enter settings mode:
more than 3 seconds.
-- Enter settings item / Confirm setting:
hold the Enter button more than 1 second, the UPS
allows users to configure the settings, and the
settings string will flash.
-- Exit Settings mode:
button for 3 seconds or On/Off button for 0,5sec.
Indicate the value of input frequency and voltage
Light on when the input power is at no loss.
Indicate the value of output frequency and voltage
The UPS has 2 groups of Load segment outlets. The output plug
indicator will light on if there is output power respectively.
Strings Indicate the UPS status
Strings Indicate user setting options
Light on when the UPS is failure or alarm.
Light on when the UPS under settings mode.
Indicate the amount of battery volume remaining. Each battery
volume level bar indicates a 20% of total battery volume
Indicate the percentage of UPS load capacity which is being
used by the protected equipment. Each LCD level bar indicates
a 20% of the total UPS output capacity.
Function
Press and hold the
Press for 1 second.
to select the settings
Press and hold the button
Press and hold the Enter
Function
Press
Press and