Control Software - Master audio DSP206 Manual Usuario

Master Audio

4.3 Control Software

4.3.1 Introduction
The DSP units are shipped with a Computer Software which provides a Graphic User
Interface (GUI) application - DSPLink. DSPLink allows the user to control the DSP
unit from a computer via the USB communication link (or additionally through
Ethernet, in model DSP608). For the USB connection, a driver must be installed
(included with the DSPLink installation package).
The GUI application makes it much easier to control and monitor the device, allowing
the user to get the whole picture on one screen. Programs can be recalled and stored
from/to Computer's hard drive, thus expanding the storage to become virtually
limitless.
DSPLink is available for PC and Mac. A USB pen drive or CD-ROM with the software
is included in the original package of the unit Check Master Audio's website for a
latest version download (www.master-audio.com).
4.3.2 Installation for PC-Windows
Double click the installation file, depending whether you have a 32 or a 64-bit system:
Master_Audio_DSPLink_32_bit_v_10_X_X_BuildNr.msi
Master_Audio_DSPLink_64_bit_v_10_X_X_BuildNr.msi
Follow the on-screen instructions. You may be prompted to install the Microsoft
Visual Runtime libraries before finishing the installation. Click the checkbox to
proceed with this action.
NOTE: Installations under Windows 8 (or newer) require configuring Windows to
accept the installation of drivers without digital signature. Should you need support in
that, please refer to section 8.1 of this manual.
4.3.3 Installation for Mac
First unzip the provided installation file:
Master_Audio_DSPLink_v_10_X_X_BuildNr.mpkg.zip
DSP206-608. Version 1.2 Apr 14 8