Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
A.
1
1
B.
2
Faucet Installation - Deck Mount (Optional)
SHUT OFF WATER SUPPLIES
A.
Remove old faucet. Place baseplate
shanks (1) through mounting holes
in deck. Option: If sink is uneven, use
silicone sealant under the baseplate.
Place base ring (2) onto baseplate
making sure the notches (3) are
properly aligned and hole (4) is
toward the back. WARNING! Failure
to install the base ring (2) will
result in damage to the product.
Make sure hex opening (1) on hub
B.
base (2) is properly aligned with the
hex key inside of hub. Place
4
3
3
1
1
C.
2
3
escutcheon (3) over base ring and
baseplate. Insert faucet down
into escutcheon assembly.
Push faucet as far back as possible
C.
to allow room for hose. Snap
mounting bracket (1) and bag
bracket (2) together. Secure faucet
to sink with brackets (1) & (2) and
nut (3). Tighten securely using
supplied wrench (4). Note: The
wrench provided is designed to be
used with a variety of tools:
flat/phillips head screwdrivers,
wrenches, etc. Install locknuts (5)
and hand-tighten.
4
5
2
3
4
1
5
Publicidad
Tabla de contenido
