Starting The Appliance - ARIETE 2862 Manual Del Usuario

DESCRIPTION OF THE APPLIANCE (FIG. 1)
1 - Lid
2 - ater level indicator ( A )
3 - ater level indicator ( I )
4 - Power cord + Plug
5 - Power supply base
6 - Power supply voltage commutator
7 - On-off switch Operation indicator light
8 - Handle release button
9 - Handle
10 - Lid opening button
PRELIMINARY PHASES FOR USE

Starting the appliance

- If the kettle is in the closed position, hold the upper part of the kettle and pull it upwards (Fig.
2). The body of the kettle must be completely distended.
- Rotate the handle in vertical position (Fig. 3).
- Lock the handle in its seat. The correct locking occurs with a "click" (Fig. 4).
The ettle can be used ith 22
is equipped with a power supply switch (6) located under the power supply
base ( ig. ). Turn the switch towards the 2
whether the mains oltage is 22
Before connecting the appliance to the mains check that the voltage indicated on the rating
plate under the appliance matches with the local mains. Place the appliance on a horizontal
and stable surface.
Warning!
o not place the appliance or the power cord near or on gas electric stoves
when they are hot, or near a microwaves oven.
Prevent the cord from protruding beyond the edge of the table or surface. Pre-
vent children from grabbing the cord, in this way tipping over the appliance.
The cable must not touch the hot parts of the appliance.
Position the appliance so that children cannot reach the hot parts.
or electric net or s. The appliance
or
or .
indication according to
15