Optional Installation Steps; Install An Sd Card (Optional); Inverted Installation - Axis Q8685-E PTZ Guia De Instalacion

Optional installation steps

Install an SD card (optional)

A standard or high capacity SD card (not included) can be used to store recordings locally in the
product. See Specifications on page 47 before installing the SD card.
1. Disconnect power from the product.
2. Remove the four top cover screws and remove the top cover.
3. Insert an SD card into the SD card slot, see Hardware overview on page 16 .
4. Replace the top cover and tighten the screws (torque 3.0 Nm).
5. Re-connect power to the product.

Inverted installation

Note
Follow this installation to set the camera housing in an inverted configuration, if tilting
directly upwards is preferred.
CAUTION
This installation requires two persons.
AXIS Q8685-E PTZ Network Camera
29
EN