Skytron F-SLSKY Instrucciones De Uso página 13

INSTRUCTIONS FOR USE
c. Slide the Split Leg Section on the table accessory side rail until it is in the desired
location.
d. When the product is in position, tighten the Rail Lock Knob securely by turning
clockwise to secure Split Leg Section onto surgical table side rail.
e. Ensure that the Split Leg Section is secure by pulling towards the operator as shown
in the picture below.
f. Repeat steps a -f above for the opposite Split Leg Section.
To Adjust for Lithotomy
a. To adjust the lithotomy angle of
the Split Leg Section, loosen the
Lithotomy Lock Knob on the
clamp as shown below and
adjust as needed.
Document Number: 80024539
Version: B
Page 13
Do not position the
products clamp over cut-
outs in the side rail or a
pivoting joint in the table
rails; the clamp may be
broken when the table is
articulated.
Lithotomy
Lock Knob
Issue Date: 18 MAR 2020
Ref Blank Template: 80025118 Ver. E