Husky 27BC401BP-THD Guia De Inicio Rapido
Husky 27BC401BP-THD Guia De Inicio Rapido

Husky 27BC401BP-THD Guia De Inicio Rapido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

OPERATOR'S MANUAL
4-DRAWER BASE CABINET
MODEL # 27BC401BP-THD
SERVICE PARTS
CALL 1-866-440-3170 FOR SERVICE PARTS. Please provide
the Model Number when calling. To expand your garage storage
project, please visit www.homedepot.com/garagestorage for ad-
ditional product options.
LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
CAPACITIES
• The maximum load capacity for each drawer is 30 lbs. evenly
distributed. The maximum load capacity for the stainless steel
work surface is 500 lbs. evenly distributed.
• Empty weight of the unit is 83.5 lbs.
• The maximum product weight, including contents, stored in the
drawers/shelves and on the work surface is 703.5 lbs.
MAINTENANCE
• Lubricate lock with graphite, (yearly).
STAINLESS SURFACES:
• Stainless steel can discolor when exposed to pool chemicals,
saltwater or cleaners with bleach.
• Keep your stainless looking new by cleaning with a good quality
all-in-one stainless steel cleaner polish monthly. Frequent clean-
ing will remove surface contamination that could lead to rust.
• Do not clean with steel wool or other abrasive pads.
• Do not use cleaners not specifically intended for stainless
steel on stainless surfaces (this includes glass, tile and
counter cleaners).
Ball bearing slides
PAINTED SURFACES:
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit's luster finish. Apply the wax
as to a car. The wax will also help protect the unit against
scratches.
• Grease and oil can be removed with most standard
cleaning fluids. For safety, use a nonflammable cleaning fluid.
• If drawer liners are supplied, it is recommended they are used
to protect the finish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned
with soap and water.
DANGER
is used to indicate a hazardous situation which,
if not avoided, will result in serious injury or death.
WARNING
indicates a hazardous situation which,
if not avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
CAUTION: Read and follow all Safety Rules and Operating
Instructions before first use of this product.
DANGER
• DO NOT stand on this product. You may fall
or cause product to tip.
• DO NOT open more than one drawer. The product
may become unstable and tip.
• DO NOT step in the drawers. You may fall
or cause product to tip.
• DO NOT mount this product on a truck bed
or any other moving object.
• DO NOT move the product prior to closing
and locking all the drawers. The drawers could come open
and make the product unstable and tip.
WARNING
• WEAR SAFETY GLASSES when removing or repositioning
the slides.
• DO NOT pull the unit, push it when moving
• USE THE BRAKES when not moving this product. This will
prevent the product from rolling.
• DO NOT alter this product in any manner. For example, do not
weld external lockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• BE CAREFUL when closing the cover. Remove hands before
the cover closes completely.
CAUTION
• This product is not designed to be directly lifted with a fork lift, or
to be towed with any mechanical devices.
• The maximum weight for each drawer should never be exceeded.
• Only transport this product empty. Properly secure when transporting.
• DO NOT exceed maximum product weight, including contents. See
Capacities for more information.
Friction slides
SAFETY
F1776

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Husky 27BC401BP-THD

  • Página 1 OPERATOR’S MANUAL Ball bearing slides Friction slides 4-DRAWER BASE CABINET MODEL # 27BC401BP-THD PAINTED SURFACES: • Periodically the drawer fronts, drawer trim, and other surfaces should be cleaned with a mild detergent and water. • Auto wax will preserve the unit’s luster finish. Apply the wax as to a car.
  • Página 2: Carton Contents

    CARTON CONTENTS HARDWARE Literature TOOLS REQUIRED: Hardware bag 1/2in wrench (2) OPTIONAL TOOLS: Screwdriver Flathead ASSEMBLY 7/16in Open end wrench LEVELING FEET Items Needed: HARDWARE INCLUDED: AA - 5/16-18 Hex Head Screw (Qty:16) BB - 5/16 Washer (Qty: 16) CC - 5/16 Hex Locknut (Qty: 16) DD - Screw Leveler (Qty: 4) AA - 5/16-18 Hex Head Screw (Qty: 16) EE - Mount Plate (Qty: 4)
  • Página 3 OPERATION INSTALL LEVELING FEET Items Needed: DD - Screw Leveler (Qty:4) REMOVING DRAWERS Process: • Empty the drawer. • Install (4) levelers DD. Some adjustment may be • Fully extend the drawer. necessary after cabinet is in desired location. Release •...
  • Página 4 INSTALLING DRAWERS Leveling Foot Adjustment • Adjust Screw Leveler to desired position with Flathead Ball bearing slide - Pull slides and slide carrier out to fully Screwdriver or 7/16in open end wrench as shown. extended position (see illustration.) Hold the slide on the cabinet while aligning it with the slide on drawer.
  • Página 5: Piezas De Servicio

    Correderas de friccion GABINETE DE BASE DE 4 GAVETAS SUPERFICIES PINTADAS MODELO NO. # 27BC401BP-THD • Limpie con detergente suave y agua los frontales y los bordes laterales de los cajones y las demás superficies. • La cera para automóviles preservará el acabado brilloso de la unidad.
  • Página 6: Contenido De La Caja De Cartón

    FERRETERÍA CONTENIDO DE LA CAJA DE CARTÓN Material impreso HERRAMIENTAS NECESARIAS: Bolsa de accesorios Llave Inglesa de 6mm HERRAMIENTAS OPCIONALES: Destornillador, de cabeza llana Llave de extremo abierto de los 7/16in ENSAMBLAJE PATAS NIVELADORAS Elementos necesarios: PIEZAS INCLUIDAS: AA - Tornillo de Cabeza Hexagonal de 0,79 - 45,72 cm (Cant.: 16) BB - Arandela de 0,79 cm (Cant.: 16) CC - Contratuerca de 0,79 cm (Cant.: 16) DD - Nivelador de Tornillo (Cant.: 4)
  • Página 7: Funcionamiento

    ENSAMBLAJE FUNCIONAMIENTO NOTA: No todas las instrucciones de ensamblaje se refieren a tu modelo. INSTALAR LAS PATAS NIVELADORAS Elementos necesarios: DD - Nivelador de tornillos (Qty:4) REMOCIÓN DE GAVETAS Proceso: • Vacíe la gaveta. • Instala (4) Niveladores de Tornillo (DD). Quizá sea necesario •...
  • Página 8 FUNCIONAMIENTO QUITAR E INSTALAR LAS CORREDERAS DE LA UNIDA Estilo fricción - extienda completamente la gaveta. Inserte el • Primero quita el cajón. (Ver la sección A) destornillador en la ranura del costado y presione el tope hasta Para quitar la corredera: que libere el rejón.

Tabla de contenido