Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

OPERATOR'S MANUAL
28 IN WALL CABINET
MODEL # 28WC01BP-THD
NOTE: IT IS RECOMMENDED THAT
UNIT IS ASSEMBLED WITH AT
LEAST 2 PERSONS.
SERVICE PARTS
CALL 1-866-440-3170 FOR SERVICE PARTS.
provide the Model Number when calling. To expand your garage
storage project, please visit www.homedepot.com/garagestorage
for additional product options.
Locating Model # Information
Model numbers and other information required for service parts is
CAPACITIES
located on a white label on the upper right hand corner of the unit.
CAPACITIES & DIMENSIONS
• Empty weight of the unit is 32 lbs.
• The maximum load capacity for each shelf is 75 lbs. (evenly
distributed).
• The maximum product weight, including contents stored on the
shelves, is 232 lbs., if mounting to a STUD WALL.
• The maximum product weight, including contents stored on the
shelves, is 175 lbs., if mounting to Husky® Trackwall.
• Unit dimensions without trackwall hanger bracket: 28in wide x
12.9in deep x 28in high.
• Unit dimenstions with trackwall hanger bracket: 28in wide x
13.8in deep x 28.8in high.
• Periodically the surfaces should be cleaned with a mild
detergent and water.
• Grease and oil can be removed with most standard cleaning
fluids. For safety, use a nonflammable cleaning fluid.
• Auto wax will preserve the unit's luster finish. Apply the wax as to
a car. The wax will also help protect the unit against scratches.
Read and follow all Safety Rules and Operating
Instructions before first use of this product.
DANGER
situation which, if not avoided, will result in serious injury
or death.
WARNING
if not avoided, could result in serious injury or death.
CAUTION
which, if not avoided, may result in minor injury, moderate
injury, or property damage.
WARNING:
• DO NOT stand on this product. You may fall.
• Stacked products must be bolted together if applicable. The
products could become unstable and tip.
• DO NOT mount this product on a truck bed or any other
moving object.
• DO NOT step on the shelves. You may fall.
• DO NOT tow with power equipment, the product could tip.
• The shelf MUST always rest on the top of the side rail
for proper support.
CAUTION:
• DO NOT move with fork truck unless secured to a pallet.
Please
• DO NOT alter this product in any manner. For example, do
not weld external lockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may
become unstable and tip if stored or moved on an
un-level surface.
• Cosmetic surfaces may become discolored if they come in
contact with Toluene, Methyl Ethyl Ketone (MEK), or any
other strong chemical. Clean surfaces immediately with
soap and water to prevent discoloration. Polish with auto
wax or equivalent and cloth.
• When hanging the Wall Cabinet, be sure to secure the Wall
Cabinet to a studded wall, concrete wall or Waterloo Track-
wall. Failure to do so may cause the Wall Cabinet to fall. This
may cause personal injury or product damage.
• Wall Cabinet MUST be attached to two studs in a wood frame
wall. Failure to do so may cause personal injury or product
damage. Use appropriate hardware per your local building
codes. Failure to do so may cause personal injury or product
damage. Use two or more people to move and assemble
cabinet. Failure to do so may cause personal injury or product
damage. Cabinet must be mounted level. Failure to do so
may cause personal injury or product damage.
MAINTENANCE
SAFETY
is used to indicate a hazardous
indicates a hazardous situation which,
is used to indicate a hazardous situation
F1778

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Husky 28WC01BP-THD

  • Página 1 • The maximum product weight, including contents stored on the may cause personal injury or product damage. shelves, is 175 lbs., if mounting to Husky® Trackwall. • Unit dimensions without trackwall hanger bracket: 28in wide x • Wall Cabinet MUST be attached to two studs in a wood frame 12.9in deep x 28in high.
  • Página 2: Tools Required

    HARDWARE TOOLS REQUIRED: Socket Wrench 7/16in Deep-well Socket LL - Left Hinge (Qty: 2) Square Cross-tip Screwdriver Drill 1/8in Drill Bit Level OPTIONAL TOOLS: Screwdriver Flathead MM - Right Hinge (Qty: 2) 7/16in Open end wrench HARDWARE INCLUDED: NN - Hinge Plate (Qty: 4) AA - 1/4-20 X 5/8-in Carriage Bolt (Qty: 10) BB - 1/4-20 X 3/4-in Button Head Screw (Qty: 18)
  • Página 3 ASSEMBLY BACK PANEL CONSTRUCTION ATTACH SIDE PANELS Items Needed: Items Needed: BB - 1/4-20 x 3/4-in Button Head Screw (Qty: 2) BB - 1/4-20 x 3/4-in Button Head Screw (Qty: 4) DD - 1/4-20 Serrated Flange Nut (Qty: 2) DD - 1/4-20 Serrated Flange Nut (Qty: 4) C - Back Panel (Qty: 2) A - Side Panel (Qty: 2) Process:...
  • Página 4 ATTACH BOTTOM AND HINGE PLATES INSERT INTERIOR SHELF Items Needed: Items Needed: AA - 1/4-20 x 5/8-in Carriage Bolt (Qty: 4) AA - 1/4-20 x 5/8-in Carriage Bolt (Qty: 2) BB - 1/4-20 x 3/4-in Button Head Screw (Qty: 6) D - Shelf (Qty: 1) CC - 5/16-in Washer (Qty: 4) CC - 5/16-in Washer (Qty: 2)
  • Página 5 MOUNTING OPTION 1 FOR HANGING CABINET MOUNTING OPTION 2 FOR HANGING CABINET ON HUSKY® TRACKWALL DIRECTLY TO WALL Items Needed: Items Needed: B - Top (Qty: 1) B - Top (Qty: 1) BB - 1/4-20 x 3/4-in Button Head Screw (Qty: 6)
  • Página 6 SQUARE CABINET DOOR HINGE ATTACHMENT Items Needed: Items Needed: Socket Wrench PP - 5/32-in Hex Key AA - 1/4-20 x 5/8-in Carriage Bolt (Qty: 4) 7/16-in Deep-well Socket Square CC - 5/16-in Washer (Qty: 4) DD - 1/4-20 Serrated flange Nut (Qty: 4) Process: NN - Unit Hinge (Qty: 2) •...
  • Página 7: Magnet Installation

    MAGNET INSTALLATION LOCK INSTALLATION Items Needed: Items Needed: HH - Magnet (Qty: 2) KK - Single Bitted Lock (Qty: 1) Process: Process: • Place the magnet HH on the right door in the • Hold lock (KK) in hand and insert key into lock. locations noted.
  • Página 8 FINAL MOUNTING OPTION 1 OPERATION Process: LOCKING AND UNLOCKING THE UNIT Note: Option 1 is for hanging cabinet on Husky® Locking the Unit: Trackwall. If hanging cabinet directly on wall, • Make sure doors are fully closed. go to option 2.
  • Página 9: Seguridad

    • El peso máximo del producto, incluyendo el contenido de los estantes, • El armario para pared DEBE sujetarse a dos clavijas en una pared es de 175 lb, si se monta en una pared de rieles Husky®. con marco de madera. En caso contrario, pueden producirse lesiones •...
  • Página 10: Contenido De La Caja

    HERRAMIENTAS HERRAMIENTAS NECESARIAS: LL - Perno superior de la bisagra Llave de cubo Cubo profundo de 11,1 mm (7/16-in) (cantidad: 2) Escuadra Destornillador estrella Taladro Broca para taladro de 3,2 mm (1/8-in) Nivel Dado largo de 3/8 pulgadas HERRAMIENTAS OPCIONALES: Destornillador, de cabeza llana Llave de extremo abierto de los 7/16in MM - Perno inferior de la bisagra...
  • Página 11: Montaje Del Panel Trasero

    ARMADO MONTA LOS PANELES LATERALES MONTAJE DEL PANEL TRASERO Elementos necesarios: Elementos necesarios: BB - Tornillo de cabeza redondeada de 19 mm (3/4-in) de largo, BB - Tornillo de cabeza redondeada de 19 mm (3/4in) de largo, 6,4 6,4 mm (1/4in) de diámetro y 20 roscas por pulgada (cantidad: 4) mm (1/4-in) de diámetro y 20 roscas por pulgada (cantidad: 2) DD - Tuerca de la brida dentada de 6,4 mm (1/4-in) de diámetro y DD - Tuerca de la brida dentada de 6,4 mm (1/4-in) de diámetro y...
  • Página 12: Instala El Fondo Y Las Alas De Las Bisagras

    INSTALA EL FONDO Y LAS ALAS DE LAS BISAGRAS INSERTAR EL ESTANTE INTERIOR Elementos necesarios: Elementos necesarios: AA - Perno con cabeza de hongo de 1,6 cm (5/8-in) de largo, 6,4 AA - Perno con cabeza de hongo de 1,6 cm (5/8-in) de largo, 6,4 mm (1/4-in) de diámetro y 20 roscas por pulgada (cantidad: 4) mm (1/4-in) de diámetro y 20 roscas por pulgada (cantidad: 2) BB - Tornillo de cabeza redondeada de 19 mm (3/4-in) de largo,...
  • Página 13: Opción 1 Para Sujetar El Armario En La Pared De Husky® Del Montaje De Pared Deben

    OPCIÓN 1 PARA SUJETAR EL ARMARIO EN LA OPCIÓN 2 PARA SUJETAR EL ARMARIO PARED DE HUSKY® DEL MONTAJE DE PARED DEBEN DIRECTAMENTE EN LA PARED Elementos necesarios: Elementos necesarios: B - Parte superior (cantidad: 1) B - Parte superior (cantidad: 1)
  • Página 14: Gabinete Cuadrado

    ADITAMENTO DE LA BISAGRA DE LA PUERTA GABINETE CUADRADO Elementos necesarios: Elementos necesarios: AA - 1/4-20 x 5/8-in Pernos de Carro (Cant: 4) Remache a Presión (Cant.: 2) Casquillo Profundo de 1,11 cm CC - 5/16-in Arandela (Cant: 4) PP - 5/32-in Llave hexagonal Ajustar a Escuadra DD - 1/4-20 Tuerca de Reborde Dentado (Qty: 4) Proceso:...
  • Página 15: Instalación De La Cerradura

    INSTALACIÓN DEL IMÁN INSTALACIÓN DE LA CERRADURA Elementos necesarios: Elementos necesarios: HH - Imán (Cant.: 2) KK - Dispositivo de seguridad con una sola broca (Cant: 1) Proceso: Proceso: • Coloque el imán HH en la puerta a la derecha en las localizacio- •...
  • Página 16: Instalar Los Remaches

    Figura 14 Proceso: Nota: la opción 1 es para sujetar el armario en una pared de Husky®. Si desea sujetar el armario directamente en la FUNCIONAMIENTO pared, vaya a la opción 2. • Con ayuda, enganche el soporte H de sujeción sobre la CÓMO UTILIZAR EL MECANISMO DE BLOQUEO Y...

Tabla de contenido