Electrical Wiring Connection - McQuay 5WMWS-GR Serie Manual De Instalación

5WMWS 10 / 15 / 20 / 25 GR <> 5WSS 07 / 10 / 15 / 16 / 20 / 25 AR
5WMWS-GR
Terminal Block
5WMWS 10 / 15 / 20 / 25 GR <> 5LC 07 / 10 / 15 / 20 / 25 CR
5WMWS-GR
Terminal Block
• All wires must be firmly connected.
• All wires must not touch the refrigerant piping,
compressor or any moving parts of the fan motor.
• The connecting wires between the indoor unit and the
outdoor unit must be clamped on the wire clamps as
shown in the figure.
• The power supply cord must be equivalent to H05RN-F
(245IEC57) which is the minimum requirement.

ELECTRICAL WIRING CONNECTION

Water Outlet Sensor
4WV
OF
Interconnection Cable
COMP
N2
N1
L
!
Outdoor Coil Sensor
4WV
Interconnection Cable
OF
COMP
N2
N1
L
!
5WSS-AR
Terminal Block
4WV
COMP
N
!
N
L 220 ~ 240V/1Ph/50Hz
E
The electrical power must be provided with
protection devices (circuit breaker or fuse) with
double pole separation system (phase + neutral)
with minimum contact gap of 3mm.
5LC-CR
Terminal Block
4WV
OF
COMP
N
!
N
220 ~ 240V/1Ph/50Hz
L
E
The electrical power must be provided with
protection devices (circuit breaker or fuse) with
double pole separation system (phase + neutral)
with minimum contact gap of 3mm.
Wire Clamp
Interconnection
Cable
1-7
Power Supply
Cable