Atlas Copco G2420 Manual De Producto página 11

G2420
9. Remove the complete motor assembly (20-31) and the felt (29).
10. Keep the o-ring (22) inside the housing.
11. Attach the motor assembly in a vise and remove the rotor assembly
(20-28), see Instructions for vane motor, Dismantling.
12. Remove the rotor blades (24) from the rotor (25).
13. Attach the rotor (25) in a vise and remove the lock nut (31).
14. Pull off the spacer (26), the front end plate (27), the ball bearing (28).
15. Knock out the ball bearings (20/28) from the front end plates (21/28) by
using a mandrel.
EN
© Atlas Copco Industrial Technique AB - 9839 0458 00
Service
11