Assembling the vacuum cleaner
Always remove the plug from the power socket before fitting or removing accessories.
Fitting the flexible hose
-
Insert hose joint into the air intake duct on the front of appliance.
-
Press until it clicks into position.
Removing the flexible hose
-
To release the flexible hose, press the release buttons on the sides of the hose to unblock the con-
nection mechanism. Remove the flexible hose from the air intake duct.
Fitting the extension tubes and accessories
-
Insert the telescopic tubes into the curved handle of the flexible hose. To extend the tube, press the
button in the central joint and pull the inner tube toward the outside.
-
Insert the vacuum accessory you intend to use into the end of the telescopic tube.
Removing the telescopic tube and accessories
To remove the plastic tubes and accessories, grasp firmly and pull hard.
18