Using the appliance
Unwind a sufficient length of cable. A YELLOW mark on the power cable shows the ideal cable length.
Donʼt expend the cable beyond the RED mark. Make sure the cable cannot be treaded on or pressed by
any object and insert the plug into the power socket.
1. Press the on-switch pedal to start the appliance.
2. To adjust the vacuum power slide the power control on
the handle. The vacuum will be lowered opening the air
hole.
Rewinding the cable
To rewind the cable, press the cable-rewinding pedal.
ATTENTION: The cable rewinds very fast. Pay attention not to get hurt.
Using the cleaning accessories
•
Motor brush
You can use this brush for cleaning carpets and moquette.
•
Parquet brush
This brush has been specially designed for delicate wood surfaces. Thanks to its bristles made of natu-
ral fabrics, you can vacuum parquet floors without scratching them.
21