Air Circulation - Zibro P 24 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
• If the ambient temperature is higher than 23ºC, the unit will work in
cooling mode.
• If the ambient temperature is < 23ºC, the unit will work in air circulation
mode.
3
With
-button you can change the operating mode of the unit.
By pressing the
-button the following modes appear:
Automatic mode
Cooling mode
Air circulation mode
cOOling
When the unit is in the cooling mode, the following functions apply:
The fan speed can be adjusted by pressing the
Maximum setting.
Lowest setting.
The temperature can be set by pressing the
between 18°C en 32°C. The display will show the set temperature for 8
seconds and the "set temp" will light up. Fifteen seconds after setting the
required temperature, the display will show the room temperature. The
pre-set temperature for this unit is 24ºC for cooling.
G
It depends on the environment whether the required temperature will
be reached. It is not a malfunction of the air conditioner if the room
temperature remains above the "set temp". It could well be that the
heat load of the room is too much.

Air circulAtiOn

In this mode the unit only circulates air; the unit will not cool or dehumidify.
The air is filtered.
When the unit is in this mode, the following functions apply:
The fan speed can be adjusted by pressing the
Maximum setting.
Lowest setting.
In auto mode, the unit will choose the ventilation speed automatically
according to the ambient temperature. The speed switch cannot be changed
in this mode.
4
When the unit is switched off the most recent setting will be stored in
memory.
5
The timer function allows you to switch the unit on or off at a certain time.
1.
Press TIMER button to set the operating hours you desired (1 to 12 hours,
the timer indicator will light on). When the set time has been reached, the
machine will turn off automatically. The display window will show the hour(s)
you set as you press TIMER button. If the timer button is not pressed, the unit
will work continuously.
-button
and
buttons, anywhere
-button
4
71

Publicidad

Tabla de contenido
loading

Tabla de contenido