TrekStor DataStation pocket pace 3.0 Manual Del Usuario página 11

5) Specifications
Dimensions (W x H x D)
Weight
Type of housing
Form factor
Interface
Supported operating systems
System requirements
Please note that the drivers for the USB 3.0 port are not automatically
i
installed with all operating systems. If you have any questions about the
installation of these drivers, please contact the manufacturer of your
computer or of the used USB 3.0 interface card.
6) Connecting the DataStation to a computer
a) Connect the USB 3.0 port of your DataStation with a USB 3.0 port of
your computer. Please use only the provided USB 3.0 cable.
Thanks to the downward compatibility of USB 3.0 you can also connect your
i
DataStation to a USB 2.0 or USB 1.1 port of your computer. In this case, you
will not be able to benefit from the higher data transfer rate that you can
get when you connect the DataStation via USB 3.0. When connecting via an
older USB standard, please also use the provided USB 3.0 cable.
Power supply under USB 2.0: If your USB 3.0 hard disc is not recognized on
i
your PC with a USB 2.0 connection, this could probably be caused by the
power supply. In this case, please connect an USB hub with an external
power supply.
b) Your operating system automatically recognizes the DataStation
and adds the DataStation as a "l
"m C
y omputer
(Mac OS X and Linux). Your DataStation is shown as "TREKSTOR".
"/"C " (Microsoft Windows) or "D
omputer
78 x 14 x 127 mm
ca. 164 g
Plastic
2.5"
1x SuperSpeed USB 3.0
(Micro-USB socket)
Windows® 8.1 / 8 / 7 / Vista®/ XP (SP 2),
Mac® OS X® 10.6 or above,
Linux® Kernel 2.6.x or above.
Free USB connection (SuperSpeed USB 3.0,
Hi-Speed USB 2.0, USB 1.1)
D " (or "l
oCAl isk
D ") to
oCAl rive
"
esktop
EN
11